Advanced Quality Controller
According to current Industrial requirements all Engineers should be multitalented and specialized in at least 2 or more specific technical areas. Though Engineering topics are vast and wide, fresh Engineering graduates may not be able to stick up to the mark of present industrial requirements as above said. To bridge this gap Fresh Engineers need to be trained and certified in Specialization Certification Course and enrich their knowledge equivalent to an Engineer having Minimum 3 year’s industrial active experience. Now days, Specialization Certification Courses are considered as a mandatory requirement in almost all industries.
Decibel thrives to bridge this great gap for fresh engineers by providing Internationally Recognized certification Course towards industries like – Oil & Gas, Petrochemical, Aerospace, Aircraft, Defense, Marine, Automotive, IT etc.
We are delivering Training & Certifications on various Global certification courses in Europe, USA, Middle East, Africa and Asia from 2000 onwards for various corporate companies and general public.
About Advanced Quality Controller Course Details
Advanced Certified Quality Controller or Advanced QA/QC Course is a Post Engineering Specialization Certification course for Engineering Graduates & Diploma Holders. After Successful completion of this course, each candidate will be enough trained equivalent to an Engineer of 5 year relevant experience in handling various duties and responsibilities of respective industry. The AQC Professional may work in following designation at various industries
- Fabrication Engineer
- Inspection Engineer
- Welding Engineer
- Welding Inspector
- Reliability Engineer
- Risk Based Inspection Engineer
- Quality Manager
- Piping Instructor
- Maintenance Engineer
- Mechanical Inspector
- MEP Engineer
- HVAC Engineer
- MEP Project Supervisor
- HVAC Supervisor
- MEP Site Engineer
- HVAC Site Engineer
- Advanced NDT Specialist
- Advanced NDT Engineer
- Vendor Inspector
- Quality Engineer
- NDE Engineer
- Welding QA/QC
- QA/QC Engineer, etc.
The Certification Course Covers wide range of topics and are not limited to Quality Control Only. This Course is crafted according to meet the Guidelines & Standards of ASHRAE, ASME, API, ASNT, ASQ, AWS, BS and ISO.
AQC is a Most Advanced Higher Competent, Exclusive Accredited Certification Course for Fresh Engineers towards the above said Advanced Quality Related Professions as an Internationally Accredited Certification.
Topics covered in AQC are updated periodically to maintain the credibility, consistency and industry needs, hence the course syllabus is regularly revised by Professional’s who review or prepares the ASME, ASNT, API, AWS, ISO Standards.
Few Topics which may be covered in detail on Certification Course are, (not limited to)
- Introduction to Advanced Certified Quality Controller Certification Scheme
- Material Engineering
- Destructive & Non Destructive Engineering
- Blasting & Coating Engineering
- Quality Management Engineering
- Damage Mechanism
- Industrial Engineering Drawings
- Piping Engineering
- Piping Inspection
- General Industrial Health & Safety
- Maintenance Inspections
- Corrosion & Deterioration
- Codes & Standards Familiarization
- Quality Documentation & Reporting
- Project Quality Management
- Time of Flight Diffraction
- Phased Array Ultrasonic Testing
- Phased Array Corrosion Mapping
- Phased Data Interpretation
- Time of Flight Diffraction Data Interpretation
- Phased Array Inspection Data InterPreparation
- MEP Engineering
- HVAC Engineering
- Lead Document Controlling
Examinations are classified into General, Open Book, Viva, Practical and P & P Preparation All
General Examination will be Objective Type Examinations with both Online & Offline mode of appearance available for all participants according to their convenience. Open Book Examinations are Objective Exams based on a given Code Book which will be allowed to refer during the examination time.
Viva Examinations are normally a part of Practical Examination.
Practical Examinations are based on check points and each participant must achieve sufficient checkpoints to clear this examination.
P & P Preparation Examinations are based on the Skill participants gained in preparation and reviewing various inspection documents.
After Successful Completion of the Certification Course, All Participants will be awarded Approved Training Certificates which entitles your participation in a Internationally Recognized Training Course and Once the Examinations are successfully completed, The Certificates of Proficiency endorsed by British Qualification & Certification Services-Scotland – (BQACS) for each independent certifiable module, will be issued to the candidates directly.
Totally 44 Certifications which includes NDT Level 2 & Other Independent Certifieable Learned Topics Will be bagged by a successful candidates.
About Qualification for admission
Candidates with educational qualification as BE/B-tech/Diploma in Mechanical, Production, Petroleum, Aerospace, Aircraft, Marine, Industrial Engineering or equivalent may apply for this Certification Course. Those who are awaiting final semester result as well as those who have to attend supplementary examinations may also apply.
Each Decibel Public Training Centre will be having maximum of 20 Seats for each training Course in a batch and interested candidates may book in advance for ensuring their seats for avoiding last minute rush for the admissions.
Duly filled in Enrollment form along with following documents like, all supporting Educational Qualification Documents both Original & 1 Xerox Copy, a Vision Acuity Certificate duly attested by a registered Ophthalmologist in the prescribed form (This may be downloaded from the Downloads section of our Website). Initial Payment towards the Enrollment & Course fee INR: 50,500 as Demand Draft, NEFT or Cash. Online registration can also be done for outstation candidates, in such case supporting documents should send via courier in such a way that it will reach Decibel’s office within 7 Days from the date of online registration.
About Accommodation & Food
Lodging facilities for an affordable price will be available for Decibel Students within walkable distance from institution. For food facility, lots of hotels and mess are available nearby the institution in all categories and candidates may slective according to their choice.
Decibel NDE has the Largest Functional placement desk with representatives in UK, USA, AUSTRALIA, RUSSIA, OMAN, SAUDI ARABIA, QATAR, KUWAIT, ABUDHABI, INDIA, PAKISTAN, IRAN, IRAQ, JAPAN, SOUTH KOREA and AFRICA. With this largest placement network we have achieved a 100% initial placement for all our Students till to date. You may Evidence our placement Postings in Our Facebook Page, Career Portal Connected with the Website,
Decibel’s Placement Desk have so far Provided 60,000 Plus Jobs/Placements for candidates (from both internal & external students) at different Global Locations.
Decibel’s Placement Desk will stay behind to support each and every candidate to get a job for gaining experience in this industry to what they have learned. Our Placement Service is not a One time Support it’s a career through support which always benefit our students in progressing their career until they stay in touch with the institution.
Decibel Guarantees a 100% initial placement in each batch of “Advanced Certified Quality Controller” Certification Course and Decibel will provide continues normal career support for career progression also.
Kindly Refer the FAQ Section For General Doubts which each candidate may feel while selecting a course or an institution.
For Admission towards this course or for further enquiries
- Lectures 0
- Quizzes 0
- Duration 600 hours
- Skill level All levels
- Language English
- Students 844
- Assessments Yes